Welding Steel Gates in Haringey – On-Site Steel Gate Welding & Repairs

24/7 On-Site Welding Steel Gates & Metalwork Across Haringey & North London From £120

If you require expert welding steel gates in Haringey, our mobile welding service is tailored for on-site steel gate repairs, fabrication, reinforcement and architectural metalwork. We attend homes, commercial sites, workshops, yards and construction locations across Haringey and nearby North London areas. Our goal is straightforward: deliver high-quality welds on your steel gates and metalwork with minimal disruption and no need to transport heavy gates or frames.

We specialise in welding mild steel gates but also handle stainless steel and aluminium where appropriate. Using MIG, TIG and stick (MMA) welding methods, we adapt to the material, thickness, access and environment. Typical tasks include gate hinge repairs, reinforcement plates, architectural steel gate fabrication, armoured vehicle welding, and general metalwork fixes that require on-site attention.

Haringey’s busy streets, tight driveways, rear access challenges and active building sites require careful planning. You send photos and details, we confirm the approach and pricing, then attend and complete the welding with a clear sign-off on completion.

✓ From £120 local call-out
✓ 24/7 emergency welding steel gates service
✓ MIG, TIG & stick welding on-site
✓ Domestic, commercial & industrial metalwork
📞 Phone: 07700161796
📍 Area: Haringey, Tottenham, Wood Green & North London
🛠️ Work: Steel gates, armoured vehicle welding, architectural metalwork, railings & general fabrication
💰 Pricing: From £120 depending on job, access & materials
✅ Typical outcomes: Strong, clean welds with practical reinforcement and lasting repairs
Welding steel gates on-site in Haringey

Request a Welding Steel Gates Quote

To speed it up: include photos, postcode, and whether the work is indoors/outdoors. For architectural or armoured vehicle welding, include design or security details if available.

For site welding in Haringey: confirm parking and whether a generator is needed. This avoids delays.

Welding Steel Gates Haringey – Pricing Guide

Our welding steel gates service in Haringey is priced based on travel, setup time, consumables, material thickness, access and job complexity. You receive a clear guide price first, then we confirm final cost after assessing the on-site requirements. The prices below reflect typical North London on-site steel gate welding and metalwork jobs.

Small Gate Repairs & Light Welding

£120/local call-out
  • Fixing cracks, breaks and minor damage on steel gates
  • Hinge, latch, bracket and handrail repairs
  • Light steel section and thin plate welding
  • Includes travel within Haringey and basic consumables
  • Ideal for quick, practical gate welding fixes

Heavy-Duty, Armoured & Industrial Welding

£480/full day from
  • Armoured vehicle welding, heavy steel gates and industrial metalwork
  • Multiple welds, complex access or extended on-site time
  • Day-rate for larger projects and high-security welding
  • Includes reinforcement plates, wear pads and specialist fabrication
  • Pricing based on photos, drawings, measurements and site details
Speak to a Steel Gate Welder

Additional Services & Options

  • 24/7 emergency welding call-out in Haringey – price on request
  • Cutting, drilling, fabrication of plates, brackets and gate frames
  • Grinding, clean-up and tidy finishing after welding (as agreed)
  • On-site reinforcement and stiffening where required
  • Work for homeowners, builders, landlords, security firms and businesses
  • Repeat welding support for ongoing site projects and security upgrades

Note: For structural or architectural steel gates, please provide engineer or design details. We weld to specifications but structural responsibility remains with your engineer.

About Our Welding Steel Gates Service in Haringey

Welding Steel Gates Haringey offers expert on-site welding and metal repairs specialising in steel gates, armoured vehicle welding, and architectural metalwork across Haringey and North London. Our service is direct and efficient: you show us what needs welding, we confirm the plan and cost, then attend and complete the work safely and professionally.

We regularly work in residential areas, commercial sites, workshops, yards, and construction locations. Jobs range from quick gate hinge repairs to complex architectural steel gate fabrication and armoured vehicle welding. We bring all necessary equipment and maintain a clean, controlled work area during welding, grinding and finishing.

We understand time pressure and security concerns. If a gate or security metalwork is broken and causing safety or access issues, we can often arrange a short-notice slot depending on workload and location. Our aim is reliability and quality without overpromising.

10+Years Welding Experience
1,500+Mobile Jobs Completed
24/7Emergency Availability

What we focus on

  • Clear communication and straightforward pricing
  • Safe setup with proper shielding and protection
  • Correct welding process selection (MIG/TIG/MMA) for the job
  • Practical reinforcement so repairs last and maintain security
Welder preparing steel gates for welding in Haringey

What Is Mobile Welding in Haringey?

On-site welding steel gates in Haringey

Mobile welding means welding performed directly at your location. We arrive with welding equipment, tools, consumables, and if needed, a generator. This eliminates the need to transport heavy steel gates, armoured vehicles, architectural metalwork or machinery to a workshop.

Our mobile welding steel gates service in Haringey caters to planned jobs such as site welding, gate fabrication, and security installations, as well as urgent repairs like broken hinges, cracked gate frames, damaged metalwork requiring immediate attention. We can work from drawings, engineer details, or clear photos and measurements.

  • ✓ On-site welding at homes, yards, shops, construction sites and commercial premises
  • ✓ MIG, TIG and stick welding for a wide range of steel gates and architectural metalwork
  • ✓ Suitable for heavy or fixed items that are difficult to move
  • ✓ Effective for fast repairs and security upgrades
  • ✓ Haringey-based coverage across North London

Common Haringey requests: steel gate hinge repairs, architectural gate fabrication, armoured vehicle welding, railing crack repairs, handrail extensions, steel brackets and supports, and general site fabrication tasks.

Why Choose Our Welding Steel Gates Service in Haringey?

🚚

Fully Mobile Service

We attend your location in Haringey with all necessary welding equipment. Ideal when steel gates, armoured vehicles or architectural metalwork cannot be moved without cost and downtime.

🛠️

Wide Range of Work

Steel gate repairs, armoured vehicle welding, architectural metalwork, railings, brackets, trailer frames and plant repairs. If it’s metal and needs welding, we assess and proceed where suitable.

⏱️

Fast Response

We offer short-notice appointments where practical. If your job is urgent, send photos and postcode so we can confirm a realistic slot quickly.

💰

Clear Pricing

You get a guide price before booking. For larger or complex jobs, we confirm pricing from details, then finalise after inspection on site.

🧱

Domestic & Trade Work

We work with homeowners, builders, security companies, garages, landlords and businesses. The approach is consistent: safe setup, proper welds, clean finish where agreed.

📍

Local Coverage

Haringey coverage includes Tottenham, Wood Green, Hornsey, Crouch End, Turnpike Lane and surrounding North London areas. This improves scheduling and response time.

Call for Welding Advice

Types of Welding Steel Gates Services in Haringey

Structural steel welding in Haringey

Structural Steel & RSJ Welding

On-site welding for beams, posts, gate frames, brackets and connection plates. Common for extensions, refurbishments and structural openings in North London properties.

  • • Beam-to-beam and beam-to-post connections
  • • Plates, stiffeners, brackets and cleats
  • • Site welding to engineer details (where provided)
  • • Useful for builders and contractors
Gate and railing welding repairs in Haringey

Steel Gates, Railings & Metalwork Repairs

Repairs, reinforcement and modifications to steel gates, railings, handrails and security grilles. Welding is carried out in position where possible.

  • • Broken hinges, latches and brackets
  • • Crack repairs on frames and bars
  • • Added plates, extra bars and security upgrades
  • • Suitable for landlords and homeowners
Vehicle chassis and plant welding in Haringey

Armoured Vehicle & Plant Welding

Mobile welding for armoured vehicle components, trailers, skips, buckets and plant equipment. We focus on practical repairs that restore function and strength.

  • • Armoured vehicle frame and panel welding
  • • Trailer frames, ramps and tow points
  • • Buckets, arms, wear plates and brackets
  • • Useful for garages, contractors and plant hire

Other common mobile welding steel gates work in Haringey

  • Metal stair repairs and reinforcement
  • Handrail extensions and repairs
  • Fabrication and fitting of small steel brackets
  • Steel frame repairs in yards and commercial units
  • Emergency “make safe” welding for damaged metalwork

Why Mobile Welding Steel Gates Matters for Haringey Customers

Transporting steel gates, armoured vehicles, or architectural metalwork to a workshop often costs more than the repair itself. Mobile welding steel gates in Haringey avoids this by fixing items on site, reducing downtime and keeping projects moving efficiently.

If a steel gate has detached, a hinge has failed, a beam connection needs finishing, or a trailer frame has cracked, on-site welding is usually the fastest and most controlled option. We assess access and safety, protect surrounding surfaces, then weld, grind and finish as agreed.

Less Downtime

We weld where the item is. You avoid unnecessary removal, loading, transport and refitting.

Cost Control

You reduce extra costs like recovery trucks, lifting equipment and disassembly work. The spend goes into the repair, not the logistics.

Practical Scheduling

We can often work evenings or weekends by arrangement. This helps when the site is busy or access is limited during working hours.

For local searches like welding steel gates Haringey, emergency gate welding Tottenham, armoured vehicle welding Wood Green, or architectural welding North London, the requirement is typically the same: a reliable welder who turns up, works safely, and completes the repair properly. That is what this service delivers.

Mobile welder repairing steel gate on-site in Haringey

What’s Involved in Booking Welding Steel Gates in Haringey

Booking is straightforward. You provide details. We confirm price and availability. Then we attend and complete the welding. There is no unnecessary back-and-forth.

1

Send Job Details

Call 07700161796 or message with photos, postcode, access notes, metal thickness (if known), and what outcome you need (repair, reinforce, fabricate, install).

2

Receive a Clear Quote

We provide a guide price or fixed quote depending on the job. You also get an estimated on-site time and the earliest workable slot.

3

We Attend & Weld On-Site

We arrive with equipment, set up safely, protect surrounding areas, then complete the welding and any agreed grinding/finishing.

4

Final Checks & Payment

You check the work. We confirm the job is complete. Payment is taken once the job is signed off on completion.

Speak to a Welder

Your Mobile Welding Job at a Glance

Step 1: Send photos + postcode + brief description.
Step 2: Confirm price and time slot.
Step 3: Welder arrives, sets up, completes welding.
Step 4: Final check and payment on completion.

Details that help us quote accurately

  • Photos from 2–3 angles, including close-up of cracks/breaks
  • Approximate thickness and material type (if known)
  • Access notes (stairs, back garden, tight alley, inside unit)
  • Whether power is available or a generator is needed
  • Whether the metal is painted, rusty, galvanised, or clean steel

How Long Do Welding Steel Gates Jobs Take?

Small Repairs

30–90 Minutes

Crack repairs, hinge repairs, brackets and smaller gate components can often be completed within an hour, depending on access, preparation and finishing required.

Medium Structural & Gate Work

2–4 Hours

Steel gate and railing repairs, moderate fabrication, and smaller beam/plate jobs usually take a few hours including setup, welding and grinding.

Larger Site & Industrial Work

Half Day – Full Day

Multiple weld locations, armoured vehicle welding or larger structural work can require half a day or a full day on site. Complex access can extend time.

Typical Job Timeline

T-1 Day: Job booked, pricing confirmed, time slot agreed.
Arrival: Inspection, preparation and safe setup.
Welding: Welding, reinforcement, grinding and finishing as agreed.
Sign-Off: Final check with you and payment on completion.

Straight answer: the time depends on preparation. If the area is accessible and can be cleaned back to bare metal quickly, the welding itself is usually fast. If access is tight or the metal is heavily corroded/painted, prep takes longer.

When Is Welding Steel Gates Needed in Haringey?

🏗️ Building & Renovation Work

When steel gate frames, posts or architectural metalwork require welding on site for extensions, openings, refurbishments and security upgrades.

🚪 Broken Steel Gates & Railings

When gates drop, hinges fail, railings crack or handrails loosen and removal is not practical or safe.

🚚 Armoured Vehicle & Trailer Repairs

When armoured vehicle components or trailer frames crack, ramps fail, or brackets and tow points need repair to restore safe use.

🏭 Industrial & Yard Equipment

When skips, bins, racks, guards, frames or brackets break and need welding on site to reduce downtime.

🏘️ Landlords & Managing Agents

When communal metalwork needs repair to maintain safety in residential buildings and shared access areas.

⚡ Emergency & Safety Repairs

When damaged metalwork is unsafe, creating risk, or preventing work from continuing on a site or property.

If you are in Haringey and the repair is urgent, the fastest route is: photos + postcode + short description. That allows us to confirm the right method and a realistic time slot.

How Welding Steel Gates Jobs Are Carried Out Safely

Welding produces heat, sparks, UV light and fumes. Each job is set up with safety controls in place. We assess the area, protect nearby items, and confirm safe working distances before welding starts.

We use appropriate PPE and safe working methods. Where required, we use welding screens, fire-resistant coverings and controlled cable management. The priority is a safe environment and a strong weld.

Mobile Welding Safety Checklist

  • ✓ Site risk assessment before starting work
  • ✓ Fire watch and suitable fire extinguisher available
  • ✓ Protection of glass, paintwork and nearby vehicles
  • ✓ Proper earthing, cables and lead management
  • ✓ PPE including helmet, gloves, jacket and eye protection
  • ✓ Clean-up of debris and inspection of welds after completion

Basic site requirements

  • Clear access to the work area
  • Flammables moved away from sparks and grinding
  • Permission to isolate or protect sensitive areas (if required)
  • Children and pets kept away from the welding zone
Mobile welder in Haringey working safely on steel structure

Benefits of Using Welding Steel Gates Service in Haringey

🕒

Save Time

No transport, no workshop queue. We weld on site so the job is completed where the steel gates or metalwork are located.

💳

Controlled Costs

Costs are tied to the job, not the logistics. You get clear pricing and a practical plan before we start.

🔧

Professional Finish

Clean welds and tidy grinding where agreed, leaving metalwork ready for paint or further finishing.

🧱

Ideal for Heavy Items

Perfect for steel gates, armoured vehicles, railings, frames, beams and machinery that cannot be moved easily or safely.

📍

Local Coverage

Haringey coverage improves response time and makes booking easier for North London sites and properties.

📞

Easy to Book

Call, WhatsApp, or use the form. Photos + postcode are enough to get started in most cases.

Bottom line: welding steel gates in Haringey is the efficient option when metalwork is fixed in place, heavy, or stopping progress.

Who Uses Our Welding Steel Gates Service in Haringey?

👷 Builders & Contractors

For structural steel connections, gate frames and general site welding on extensions, refurbishments and commercial projects.

🏠 Homeowners

For steel gate hinge repairs, railing cracks, handrails and metalwork repairs around the home and garden.

🏢 Landlords & Agents

For safety repairs on communal gates, stairs, handrails and property metalwork that needs a fast response.

🚗 Garages & MOT Stations

For welding on brackets, frames and suitable chassis repairs where safe and practical to complete on site.

🏭 Industrial & Yard Operators

For heavy repairs on skips, bins, racks, guards and metal frames to reduce downtime.

🚜 Farmers & Plant Hire

For welding on trailers, buckets, arms, brackets and agricultural or construction machinery components.

Call Welding Steel Gates Service

We also support repeat jobs for ongoing projects, such as staged refurbishments, site-based steelwork tasks, or repeated repairs to working equipment.

Welding Steel Gates Haringey – Location & Coverage

Welding Steel Gates Haringey

Base Area: Haringey, North London

Phone: 07700161796

WhatsApp: Chat with Welder

Coverage: Haringey, Tottenham, Wood Green, Hornsey, Crouch End, Turnpike Lane and surrounding North London areas

Client Reviews – Welding Steel Gates Haringey

⭐⭐⭐⭐⭐

"Steel gate hinge failed and the gate was dragging on the ground. The welder attended, repaired the hinge area, reinforced it and now the gate swings properly again."

Amir H. Haringey – March 2025
⭐⭐⭐⭐⭐

"Used for architectural gate welding on a site install. Turned up on time, followed the details provided, and left the area clean. No issues afterwards."

Lauren P. Tottenham – February 2025
⭐⭐⭐⭐⭐

"Armoured vehicle frame cracked near the door. The welder braced it, welded it properly and we were back in use the same day."

Jason K. Wood Green – January 2025

Reviews reflect typical mobile welding work: steel gates, site welding, frames, repairs and reinforcement. The main requirement is consistent quality and clear communication.

Points of Interest Near Haringey

We provide mobile welding steel gates services across Haringey and surrounding North London areas. Below are key local locations we frequently cover for residential and commercial welding call-outs.

Alexandra Palace

Large venue and surrounding roads with frequent property work nearby. We often attend for gate, railing and metal frame repairs in the area.

Tottenham Hotspur Stadium

Busy area with commercial units and contractors. Useful reference point for site welding and metalwork support nearby.

Wood Green Shopping City

High-footfall area where shops and businesses sometimes require fast welding for frames, shutters, brackets and repairs.

Bruce Castle Museum & Park

Central reference point in Tottenham. Residential streets nearby often require railings, gates and handrail welding repairs.

Hornsey & Crouch End

Common areas for domestic call-outs: steel gates, fencing repairs, handrails and structural welding linked to renovations.

Turnpike Lane / Green Lanes

Busy routes with mixed residential and commercial properties where access planning matters. We handle on-site welding with safe setup.

Frequently Asked Questions – Welding Steel Gates Haringey

1. How much does welding steel gates in Haringey cost?

Local call-outs usually start from around £120 for small gate repairs. Larger or more complex jobs are priced based on time on site, materials, access and preparation.

2. What areas do you cover?

We cover Haringey and nearby North London areas including Tottenham, Wood Green, Hornsey, Crouch End and Turnpike Lane. If you are slightly outside Haringey, ask and we will confirm.

3. Can you weld armoured vehicles and architectural steel gates?

Yes. We weld armoured vehicle components and architectural steel gates. If you have engineer or design details, provide them so we can weld to the specified requirements.

4. Do you offer emergency or same-day welding?

Where practical, yes. Call 07700161796 with photos and your postcode. We will confirm the earliest available slot and any emergency call-out cost.

5. What metals can you weld?

We mainly weld mild steel and structural steel. Stainless steel and aluminium can be welded on suitable jobs depending on access and required process.

6. Do I need to provide power?

240V power can be helpful, but we can also bring a generator if required. Confirm what is available when booking.

7. Can you weld outdoors?

Yes. Outdoor welding is common. Weather conditions matter: heavy rain and strong wind can affect safety and weld quality, so we plan accordingly.

8. Can you work from my photos?

Yes. Photos are usually enough to provide a guide price. Final pricing can depend on inspection once we arrive and see preparation requirements.

9. Do you provide materials like plates and brackets?

Yes. We can supply plates, flat bar and small sections as part of the job. Larger steel may need ordering if not standard stock.

10. Can you weld vehicle chassis for MOT?

Sometimes. We assess the area first. If corrosion is severe or the repair is not suitable, we may decline. Safety comes first.

11. How do I prepare for your visit?

Clear access to the work area, remove flammables, and ensure we can park nearby. If the job is in a rear garden, confirm the route and any restrictions.

12. How long will you be on site?

Small jobs can be completed within an hour. Larger repairs or structural work may take a half day or more. We provide a realistic estimate before starting.

13. Do you work evenings or weekends?

Yes, by arrangement. Some time slots may carry a premium depending on timing and urgency.

14. Are you insured?

Yes. We carry public liability insurance for on-site welding and fabrication. Details can be provided on request.

15. Will welding damage nearby glass or paint?

Sparks can damage surfaces. We protect areas where possible, but you should move vehicles and valuables if they are close to the welding area.

16. Can you paint after welding?

We can apply basic primer or paint as an optional extra, but full decorative painting is usually best done after the repair with your preferred finish.

17. Do you issue any paperwork for structural jobs?

We can confirm the welding completed. Structural sign-off and design responsibility remain with your engineer and building control.

18. What payment methods do you accept?

Bank transfer is preferred. Other standard methods can be discussed. Payment is normally due upon completion.

19. Can you come and quote in person first?

Often photos are enough. For larger or complex jobs, a site visit can be arranged to confirm access and scope before pricing is finalised.

20. How do I book Welding Steel Gates Haringey?

Call 07700161796, send a WhatsApp message to 07747178880, or complete one of the enquiry forms on this page with photos and a brief description.

Areas We Serve Near Haringey

Haringey

Welding steel gates and metalwork across Haringey for local call-outs, repairs and site welding support.

Tottenham

On-site welding for steel gates, railings, frames, trailers and structural steel around Tottenham.

Wood Green

Mobile welding and metal repairs for homes, shops and contractors across Wood Green.

Hornsey

Welding for railings, handrails, steel gates and renovation-related metalwork in Hornsey.

Crouch End

On-site welding for domestic metalwork, repairs and structural support tasks around Crouch End.

Turnpike Lane

Mobile welder for fast call-outs and practical repairs in Turnpike Lane and nearby streets.

Don’t see your area listed? We cover most of North London and surrounding regions. Contact us and we will confirm availability.

Call to Check Coverage